Beijing YingFuTong Import & Export Co., Ltd.
High Density Polyethylene, Hdpe, Pvc manufacturer / supplier in China, offering High Density Polyethylene (HDPE), Sodium L-Ascorbate, Linseed Oil and so on.
Home Company Profile Product List Contact Details Send Inquiry
Supplier Homepage Product List Plastic Materials High Density Polyethylene (HDPE)

High Density Polyethylene (HDPE)

Product Detail

Basic Info
  • Material: Polyvinyl Chloride/PVC
  • Usage: General Plastics
Product Description
Packaging & DeliveryPackaging Detail: 25kg/bag the inner packing is PE plastics bag, the outside wrapping is composite kraft paper bag.
Delivery Detail 7 days after order confirmed

SpecificationsHigh Density Polyethylene (HDPE)
1. CAS No.: 9002-88-4
2. HS CODE: 3901200000
3. Good quality, prompt delivery

High density polyethylene
1grade HDPE film
2SGS certificate
3for plastic bags application

High density polyethylene cable sheath material:
The product is prepared by twin-screw extruder using linear low density polyethylene resin as main raw material and adding modified resin, carbon black, lubricants, antioxidant and decentralized agents.
The products applicable to retaining layer of communication cable, control cables, signal cables and fiber optic cable, which need a good performance of environmental stress cracking resistance, with the maximum working temperature of 70.

The sheath has a good processing performance, a wide processing range, a smooth and delicate product surface. The product is easy to process for the cabling technology is similar to the LDPE sheath. With the typical characteristics of environmental stress cracking resistance greater than 500 hours completely resolves the problem of melt surface rupture and shark skin-like defects at the time of the linear polyethylene processing. The processing performance as well as the technology of the product is in the domestic leading position. The quality of the product is to be on a PAR with similar product DFDB-6059 produced by the UCC.
HDPE cable material

Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min ≤ 1.0
Tensile yield strength MPa ≥ 19.0
Flexural modulus Mpa ≥ 965
Elongation@ break % ≥ 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity   OHM-CM MIN 1x10 15
Mainly used for the production of high toughness of the telephone, cable insulation material

The Products You Might Like

Find Similar Products By Category